Products
Tomahawk II with Intel Xeon D CPU
Dual AC PSUs
Port-to-power airflow
N. America power cord
Components:
- Spectrum-4 Ethernet switches (SN5000 Series)
- BlueField-3 DPUs
- NVIDIA LinkX® cables and transceivers
- Spectrum-X license
A next-generation, highest-capacity switch for data center spine use case. Breakout options include 2 x 400G, 4 x 200G, and 8 x 100G per port, with a maximum of 320 logical ports.
64 x QSFP-DD800 switch ports with Broadcom Tomahawk 5
51.2 Tbps ASIC bandwidth
Quad-core Intel Xeon® D1713NTE CPU
64x800G or 128x400G Configuration Through Transceiver Type
Up to 24 W power budget per QSFP-DD800 port.
SyncE and PTP support with 1PPS, 10MHz, and ToD connectors on the front panel
Hot-swappable, load-sharing, redundant 3000 W AC PSUs.
A next-generation, highest-capacity switch for data center spine use case. Breakout options include 2 x 400G, 4 x 200G, and 8 x 100G per port, with a maximum of 320 logical ports. Offers reduced cost and power per bit. Scalable and enables migration to 400G leaf connectivity in data centers.
64 x OSFP800 switch ports with Tomahawk 5
51.2 Tbps Bandwidth In a Single Device
64x800G or 128x400G Configuration Through Transceiver Type
Up to 24 W power budget per OSFP800 port
SyncE and PTP support with 1PPS, 10MHz, and ToD connectors on the front panel
Hot-swappable, load-sharing, redundant 3000 W AC PSUs.
The Arista 7050CX3-32S is a 1U high-performance switch with 32x 100GbE QSFP28 ports, delivering up to 6.4 Tbps throughput. Each port supports flexible breakout options including 40G, 4x10G, 4x25G, and 2x50G enabling scalable configurations for leaf or spine deployments. With full port flexibility and wire-speed performance, it’s ideal for modern, high-density data center environments.
The Arista DCS-7050QX-32S is a high-density 10/40GbE data center switch designed for leaf-spine architectures, high-performance computing (HPC), and virtualized environments. Built on Arista’s 7050X platform, it delivers wire-speed Layer 2 and Layer 3 performance in a compact 1U form factor, enabling scalable east-west traffic for modern data center workloads.
The Arista 7050SX3-48YC12 is a 1U data center switch with 48x 25GbE SFP28 and 12x 100GbE QSFP28 ports, delivering up to 4.8 Tbps throughput. It supports flexible port speeds including 10G/25G on SFP and multiple breakout options on QSFP making it ideal for leaf-spine architectures. With low latency and non-blocking performance, it’s optimized for high-performance server and storage environments.
The Arista 7050TX3-48C8 is a 1U switch with 48x 10GBASE-T RJ45 and 8x 100GbE QSFP28 ports, delivering up to 2.56 Tbps throughput. The RJ45 ports support 1G, 2.5G, 5G, and 10G speeds for flexible connectivity, while QSFP ports provide 100G or 40G uplinks. With non-blocking performance and no oversubscription, it’s ideal for high-performance leaf-spine and mixed-speed data center environments.
The 7010TX-48 provides 48 10/100/1000Mb RJ45 ports and 4 SFP ports for 1G, 10G or 25G uplink connections with a full range of optics and cables. It offers low latency under 3 microseconds and a packet buffer of 4MB that is fully shared and allocated dynamically to ports that are congested. Consuming just 0.3 W per gigabit, the 7010X are power efficient with choices of AC and DC power, power redundancy along with hot-swap fans supporting both forward and reverse airflow in a single system.
The 7060CX2-32S deliver 32 QSFP100 ports in a 1RU system with an overall throughput of 6.4Tbps. All ports allow for a choice of 5 speeds including 100GbE, 40GbE, 4x10GbE, 4x25GbE or 2x 50GbE with a wide choice of QSFP transceivers and cables. All QSFP ports can operate in any mode without limitation enabling a wide choice of combinations for both top of rack and spine deployment.
