Dual Socket 1U Rackmount Server 750W Platinum

Rackmount Servers

Dual Socket 1U Rackmount Server 750W Platinum

Dual Socket 1U Rackmount Server 750W Platinum

Starting Configuration: $2,034.00
SKU: ASA1109-X2-R
  • Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake
  • 12 DIMMs; up to 3TB 3DS ECC DDR4-2933MHz
  • 2 PCI-E 3.0 x16 (FHHL) slots
    1 PCI-E 3.0 x8 (LP) slot
    1 PCI-E 3.0 x16 for Add-on-Module
    (Support SAS3 Storage controller)
    1 PCI-E 3.0 x4 NVMe M.2 slot
  • 4 Hot-swap 3.5" SAS3/SATA3 drive bays
  • 2 1GbE LAN ports via Intel C621
  • 1 VGA, 4 USB 3.0 (rear)
  • 750W Redundant Power Supplies Platinum Level High-efficiency

Processor
CPU 
Dual Socket P (LGA 3647)
 
"2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors! ,"
 
Dual UPI up to 10.4GT/s
 
Support CPU TDP 70-165W
Cores 
Up to 28 Cores
Notes 
BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R).
 
"Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information."
Memory
Memory Capacity 
12 DIMM slots
 
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
 
Supports Intel® Optane"! DCPMM (Cascade Lake only. Contact your Supermicro sales rep for more info.)
Memory Type 
2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note 
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
On Board Devices
Chipset 
Intel® C621 chipset
SATA 
"SATA3 (6Gbps); RAID 0, 1, 5, 10"
Network Controllers 
Dual LAN with Gigabit Ethernet from C621
IPMI 
Support for Intelligent Platform Management Interface v.2.0
 
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video 
ASPEED AST2500 BMC
Input / Output
SATA 
4 SATA3 (6 Gbps) ports
LAN 
2 RJ45 Gigabit Ethernet ports
 
1 RJ45 Dedicated IPMI LAN port
USB 
4 USB 3.0 ports (rear)
Video 
1 VGA port
DOM 
2 SuperDOM (Disk on Module) ports
BIOS Type
 
AMI 32Mb SPI Flash ROM
Power Configurations
 
ACPI / APM Power Management
Dimension
Width 
"17.2"" (437mm)"
Height 
"1.7"" (43mm)"
Depth 
"25.6"" (650mm)"
Gross Weight 
46 lbs (20.9kg)
Available Colors 
Black
Expansion Slots
PCI-Express 
2 PCI-E 3.0 x16 (FHHL) slots
 
1 PCI-E 3.0 x8 (LP) slot
 
1 PCI-E 3.0 x16 for Add-on-Module (AOM)
 
1 PCI-E 3.0 x4 NVMe M.2 slot
 
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap 
"4 Hot-swap 3.5"" SATA3 drive bays"
Backplane
 
SAS/SATA HDD Backplane
Fans
 
4 Counter-rotating 4cm PWM fans
Power supply
 
700W/750W Redundant Power Supplies with PMBus
Total Output Power 
700W/750W
Dimension 
54.5 x 40.25 x 320 mm
Input 
100 - 140Vac / 8 - 6A / 50-60Hz
 
200 - 240Vac / 4.5 - 3.8A / 50-60Hz
 
200 - 240Vdc / 4.5 - 3.8A (CCC Only)
+12V 
Max: 58A / Min: 0.5A (100 - 140Vac)
 
Max: 62A / Min: 0.5A (200 - 240Vac)
 
Max: 62A / Min: 0.5A (200 - 240Vdc)
 
(CB/CCC Only)
+5V sb 
Max: 3A / Min: 0A
Output Type 
Gold Finger Connector Mating with Molex 45984-4343
Operating Environment
RoHS 
RoHS Compliant
Environmental Spec. 
Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)
 
Non-operating Temperature:    -40°C to 60°C (-40°F to 140°F)
 
Operating Relative Humidity:    8% to 90% (non-condensing)
 
Non-operating Relative Humidity:   5% to 95% (non-condensing)
This website uses cookies to ensure you get the best experience on our website. More info. Got it!